How to Turn On Light on Gotrax G3 & G4 Scooter

This post may contain affiliate links. If you make a purchase through these links, We may earn a commission, at no additional cost to you. We only recommend products and services we believe in.

While your scooter’s primary purpose is zipping you around with effortless speed and style, it’s equally important to ensure you have the right illumination for safe night rides and enhanced visibility. 

In this comprehensive guide, I’ll walk you through the steps to activate and control the lights on your Gotrax G4. Whether you’re cruising after sunset or simply want to explore the fascinating world of electric scooters, let’s shed some light on this electrifying journey.

Before Turning On the Lights

Before we dive into how to activate the lights, let’s go through some essential information:

Turning on the Scooter

Before you can enjoy the lighting features of your Gotrax G4 E-Scooter, you need to turn it on. Here’s how:

  1. Locate the power button on your scooter. It’s situated on the left side of the handlebars, beside the grip.

  2. Press and hold the power button for a few seconds until the scooter powers up. You may need to enter a security code if your scooter has this feature.

Now that your scooter is powered on, let’s explore its lighting capabilities.

How Good Are the Lights?

The built-in lighting on the Gotrax G4 is functional for nighttime rides. The front light provides decent brightness but is primarily focused on the ground about 10-20 feet in front of you. 

For longer nighttime journeys at higher speeds, I advise you to complement the scooter’s lighting with a helmet lamp, which can cast light further ahead for better visibility.

Is There a Separate Button for Lights?

Yes, the Gotrax G4 E-Scooter does have a dedicated (+) button solely for controlling its lights. This is above the power button and the (-) button on the left grip of the handlebars.

With your scooter powered on and this lighting information in mind, let’s proceed to understand how to activate and use the various lights on your Gotrax G4 for a safe and well-illuminated ride.

How to turn on HeadLights of Gotrax G4

Step 1: Ensure Scooter Power and Security

Make sure the scooter is turned on. Enter the security code.

Step 2: Locate the Headlight Button

Locate the top plus (+) button on the left side of the handlebar, near the brake lever.

Power/control buttons of Front Light of G4

Step 3: Activate the Headlights

Press and hold the top plus (+) button for approximately two seconds.

Step 4: Verify Headlight Illumination

Confirm that the headlight has been illuminated, providing additional visibility during your ride.

How to Turn on Tailights

By Engaging the Brake Lever

The Gotrax G4 features a fender-mounted tail light for enhanced safety. These tail lights do not activate automatically; instead, they flash when you engage the handbrake lever on the left side of the handlebar. 

This feature is designed to increase visibility to other road users, but it only functions when the scooter is powered on.

Maintenance Tips for G4 Lights:

To ensure your Gotrax G4’s lights function optimally, consider these maintenance tips:

1) Regularly Check Connections

Periodically inspect the wiring and connections for your aftermarket lights if you’ve added them. Loose connections can lead to flickering or non-functional lights.

2) Battery Maintenance

If your lights are powered by separate batteries, make sure to keep them charged to avoid unexpected outages during rides.

3) Clean Your Lights

Dirt and debris can accumulate on your lights over time, reducing their effectiveness. Gently clean them with a damp cloth to maintain brightness.

|Read: How can you clean headlights with toothpaste

4) Secure Attachments

Ensure that any additional lights or accessories you’ve added to your scooter are securely attached to prevent them from falling off while riding.

Gotrax G4 Light test

Frequently Asked Questions (FAQs)

  • Can I Turn On the Lights on My Gotrax G4 E-Scooter Automatically?

    No, the lights on the Gotrax G4 E-Scooter need to be manually activated. The tail light flashes when you engage the handbrake lever, and the headlight can be turned on by pressing and holding the top plus (+) button on the left side of the handlebar.

  • What Should I Do If My Gotrax G4’s Lights Are Not Working?

    If your Gotrax G4’s lights are not working, check if the scooter is powered on, inspect the connections for loose wires, keep light accessory batteries charged, clean lights regularly, and secure any additional light attachments.

  • Can I Add Atmosphere or Turn Signal Lights to My Gotrax G4?

    The Gotrax G4 does not come with atmosphere or turn signal lights by default. However, you can potentially add aftermarket lights for these features, following the manufacturer’s installation instructions and maintenance tips for optimal performance.


And there you have it—the complete scoop on turning on your Gotrax G4 E-Scooter lights for those exciting night adventures and increased safety during your daytime rides. Remember, while your scooter comes equipped with functional lighting, you can always explore additional options like atmosphere lights and turn signals to tailor your ride to your preferences.

To summarize, before hitting the streets, make sure to turn on your scooter, utilize the built-in lights as needed, and consider aftermarket lighting accessories for that personalized touch. And don’t forget to keep your lights in top shape with regular maintenance. With this knowledge in hand, you’re all set to enjoy your Gotrax G4 with the perfect blend of style, safety, and illumination.

1 thought on “How to Turn On Light on Gotrax G3 & G4 Scooter”

Leave a comment