How to Charge Gotrax Scooter: Step-by-Step Guide 

Welcome to our comprehensive guide on charging your Gotrax scooter. This detailed and step-by-step guide will inform you of electric scooter charging instructions.

Gotrax scooters are powered by electric motors and run on rechargeable lithium-ion batteries, an eco-friendly and efficient mode of transportation. As the battery runs out of capacity, you have to recharge them, which can be done with different charging options and easy steps, as discussed below in the guide. By following this step-by-step guide, You will be able to charge your gotrax scooter in a correct way.

Battery care and efficient charging methods are essential for longer battery life. So learning how to charge your gotrax scooter is adequate for your scooter’s health.

---

Check out this All-Rounder Scooter as a Replacement!

---

Understanding Charging Options for Gotrax Scooter

When it comes to charging the Gotrax e-scooter, there are a few ways to do it. 

The first and simple way to do it is using a standard charger that comes with the scooter when you order it or using any similar charger and plugging the charging cable into the charging port. The charger is plugged into any electrical outlet. You can also use a replacement charger.

The second method is to use a portable charger or power bank to charge the electric scooter several times while on the go, depending on its capacity. A charging cable is connected to the power bank at one end and the scooter’s charging port at the other.

The third method is to use solar chargers. Several electric scooters from this company also use solar energy to charge. Using the sun’s energy to charge your scooter is a great option. Unlike an electrical outlet or power bank, this process may take longer.

[Looking for portable chargers for your scooter, Check some best portable power banks]

Understanding the charging options of scooters will ensure that you won’t face any confusion in different charging conditions.

7 Simple Steps to Charge Your Gotrax Scooter

Charging this scooter consists of straightforward steps, which are given below.

Step 1: Power off the Scooter

Ensure that the scooter is powered off before proceeding. This minimizes the risks of electrical accidents and ensures the safety of the scooter and the environment.

Step 2: Locate the Charging Port

Where is the charging port of the Gotrax scooter? The charging port is located underneath or on the side of the foot deck of the scooter. It may be covered with a rubber flip or any other kind of lid to stop dust and moisture from entering inside.

Step 3: Plug into the Charging Port

Take the charger, connect the charging cable (generally USB Cable), and connect it to the charging port of the scooter. Make sure it fits securely into the port.

Step 4: Plug into the Power Source

Next, take the charger and plug it directly into an electrical outlet for electric current. Make sure to log it firmly so it fits into the outlet.

In the case of a power bank, insert the charging cable directly into one of the output ports of the power bank and turn it On.

Step 5: Charging Indicator

How do you know if Gotrax Scooter is charging when you have set up the charger and switched on the circuit? The charging indicator on the scooter is in the form of a LED light or display of charging on the screen of the scooter. This indicates that the scooter receives the current and charging is in process.

The charger/power bank may also have an LED light that will glow red, green, or any other color, indicating current flow. 

Step 6: Gotrax Scooter Charging Time 

Allow the scooter to charge for the recommended time mentioned in the user manual. It generally takes 4-6 hours. It is recommended to charge the scooter to 80% of its battery capacity. 

It is advised not to overcharge the scooter for long periods for the sake of battery health.

Step 7: Disconnect and Store

Once the scooter is charged to the desired point, disconnect the charger from the scooter and the electrical outlet. Ensure that the charging port is not exposed by securely covering it with the rubber flap or any other protective cover provided by the manufacturer. Covering the port protects it from dust, water, and potential damage while the scooter is not in use. Store the charger for using it in the future.

By following these simple steps, you will make sure to charge the electric scooter correctly and ensure that it is ready to take you on the ride. Always follow the user manual and safety precautions during charging.

|Gotrax Scooter still not charging? Read our blog post on fixing common charging issues of Gotrax Scooter

Gotrax Scooter Charger Voltage 

The voltage of the e-scooter is generally near 42 volts. The manufacturers recommend this voltage for safe and efficient charging of the scooter battery. Using any charger with a different voltage is unsafe and can harm the battery.

Use a charger that meets the Voltage specifications mentioned in the user manual or product specifications. It is recommended to use Original charger for your gotrax scooter.

How long does a Gotrax Scooter take to Charge

As discussed above, the charging time is mentioned in the user manual or product specifications. It generally takes 4-6 hours for a full charge. It is recommended to charge the scooter to 80% of its battery capacity. 

The charging time may vary depending on the model and battery capacity. Batteries having large capacities take more time than small capacity. The charging time may also vary depending on the quality of the charger and the power of the charger. 

It is advised not to overcharge a scooter for long periods for the sake of battery health if your scooter does not have advanced battery protection features like automatically stopping receiving current once the battery gets charged.

Tips for Maximizing Gotrax Scooter’s Battery Life

• Follow proper charging guidelines provided by the manufacturer.
  
  
• If your scooter does not have the feature to switch off the current supply once the battery gets charged, avoid overcharging it as it degrades the battery’s quality. 
  
  
• Store and charge your scooter at a moderate temperature to maintain optimal performance.
  
  
• Regularly charge the scooter’s lithium-ion batteries. Avoid completely discharging and draining out the battery. Try to keep the battery between 30% and 80% of its capacity.
  
  
• Charge your scooter to at least 50% if you plan not to use it and store it for long periods.
  
  
• Pay attention to the weight limit specified by the manufacturer. Overloading the scooter puts excessive strain on the battery and reduces its life span.
• Ride on Smooth Surfaces. Avoid rough and steep paths whenever possible, as they require more energy from the battery.
• Regular maintenance, removing debris, and keeping the Gotrax Scooter clean is the key tip for long life spans.

|Want to dive deeper into this topic? Read these battery charging tips to make your scooter battery life long lasting.

Conclusion

In conclusion, we hope you know how to correctly and efficiently charge the Gotrax scooter, as it is vital for longer battery life and a smooth riding experience. In this guide, we have covered the charging options and different methods to charge the e-scooter, a step-by-step charging guide, and related information and tips to maximize its battery life.

By following these simple and easy-to-understand instructions, you can confidently charge your scooter and avoid common charging-related issues.

|If If you’ve found this article helpful, you might also enjoy our blog post on charging gotrax scooter without charger.

FAQs

• Can I leave my electric scooter on charge?

  You should not leave the electric scooter on charging for longer periods because if the e-scooter does not have a smart feature of switching up when the battery is fully charged, overcharging can harm the battery. Consider charging the battery up to 80%.

• Can you ride a scooter while charging?

  Charging while the scooter is accelerating is not recommended because the battery is heated up. However, modern devices like kinetic chargers, also called regenerative braking, are safe to use as they charge the battery only during deceleration when it is not heating. They capture kinetic energy and convert it to electricity.

• Why does my scooter have two charging ports?

  It has a few reasons; the main reason is faster charging using two ports, so the battery charges efficiently and faster at certain voltages and currents. Other reasons may be adapting to different chargers having different voltages and convenience if one of the charging ports is not working.

• Is it bad to overcharge a scooter?

  It leads to battery degradation if your battery does not have the feature to automatically switch off charging once it completes. So just in case you don’t know if your scooter has this feature, avoid overcharging.